Barcode scanners
MEFERI MS300R Ring Scanner
The MEFERI MS300R is a ring scanner designed for order picking, goods receiving, and inventory counts. Worn on a finger or on an optional glove, it lets workers scan 1D and 2D barcodes without having to set the scanner down each time they pick up an item or move a carton.
The scanner transmits data over Bluetooth 5.0 and can be quickly paired with the MEFERI ME10 wrist-mounted mobile computer via NFC. The scan button can be configured for right- or left-handed operation. A light, audible signal, or vibration indicates the scan result.
Depending on the work environment, you can choose a scan engine for close-range reading or the Zebra SE55 for scanning barcodes from farther away, such as on higher rack levels. The IP65-rated housing is suitable for dusty warehouses, and the replaceable battery lets workers get back to work quickly when the battery runs out.
Scan engines
- Zebra SE4107, SE4750SR, SE4750MR, and SE55
- Newland EM3596 and N1
Connectivity
- Bluetooth 5.0 with BR/EDR and Bluetooth Low Energy (BLE)
- HID, SPP, and GATT support
- NFC pairing with the MEFERI ME10
Battery
- Replaceable 1,000 mAh battery or optional 1,250 mAh battery
- Full charging time is approximately 1.5 hours for the 1,000 mAh battery and 2 hours for the 1,250 mAh battery
- Battery life depends on the scan engine, connectivity mode, and scanning frequency
Scan feedback
- RGB LEDs
- Audible signal
- Vibration
Interfaces
- USB 2.0
- Pogo-pin contacts
Ruggedness
- IP65-rated housing
- Withstands repeated drops onto concrete from a height of 1.5 m
- Operating temperature -10 °C to +50 °C
Dimensions and weight
- 69 × 35.6 × 23.5 mm and 76.5 g with the 1,000 mAh battery
- 69 × 35.6 × 26.5 mm and 83.2 g with the 1,250 mAh battery